929 & TII Trannys

so r these trannys nearly the same? cuz i was just reading last night the tail shaft of the b wont swap onto the TII would it swap to the 929? or is the 929 a front wheel drive car?

The 929 is in fact front wheel drive.

__________________
When I die, I want to go peacefully in my sleep like my Grandfather. Not screaming like the passengers in his car.

figured that

929's were rear drive.

__________________
If only Mazda made motorcycles too....

Got confused with the 626. I doubt the 929 came with a standard transmission though, atleast not in the States.

__________________
When I die, I want to go peacefully in my sleep like my Grandfather. Not screaming like the passengers in his car.

The B2600i, MPV, RX-7 TII, and 929 all came with atleast a rear wheel drive manual transmission option that use the Type III transmission.

There are some rear wheel drive 626s but they are pretty rare, they also made a 4 wheel steering 626 that I think was only sold in canada.

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

yes the rwd 626 was a late 70's early 80's thing. and yes 929's were rwd cars, they did come with all sorts of motors and transmissions in them too.

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

wonder what model of 929 had a tranny similar to the b n i wonder if it would bolt up to the 2.2 or FE3?? might be a easier conversion than the TII especially if the tailshaft swaps.. im sure it be rediculously hard to find..

it will be hard to find a standard in a 929, as it would have to be some special sport model. you should be able to use a b2600i 2wd trans for your swap, just need to use a f2t flywheel, clutch, and starter.

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Just asking because I dont know, why do you have to use the starter from the F2T?

Is it a different diameter flywheel?

__________________
BriankMizell's Stereo Build

Brian, starters are the same, only the ring gear diameter differs, mounting and ring gear tooth pitch all match up fine.

__________________

ive only seen a few 2 wheel b26is that should b hard to find to.. but im up 4 the challenge. i think there might actually b one in longview at a junk yard i called a few months ago to try n find some 4x4 fenders but who knows might have gotten flattend by now

really? i didn't have a stock b2200 starter to compare them too?

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Thanks for the reply Fred

__________________
BriankMizell's Stereo Build