rear end options? 93 b2200

has anyone out there found a different set of gears for these rear ends?(trying for more top end) and maybe a Limited slip diff? i know the b26's came with electric lockers and am thinking of going that route cause it the seems easiest way. but still i'm sure that rearend will still have quite a low ratio being its for a 4x4. anyone got any ideas?

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Probably much easier and more practicle to do a 5th gear or a full gear box swap, your rear end options are very limited.

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

yah, i'm already planning on the miata tranny conversion. i'm mostly looking for some kind of limited slip rear end with 6 lug pattern and the same width as stock

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Good luck with that

Mine's gonna be getting a Ford 9in w/LSD in a couple years...she's gonna need it.

__________________
My Cardomain

lincoln versai

but its a 5 lug

__________________

..l___l_.oooo
/__l_l_,\____\,__
l_---l_l__l----[ ]llllll[ ]
._(o)_)__(o)_)--o-)_)

yah the only thing close would have to be from an import, unless maybe a colorado if they came with one? but i'm thinking the b2600 rear will have to do cause it will probably be the cheapest and i can just rig the locker on a switch on my shifter. i guess know one knows if any of the car IRS gears interchange with the truck diff set?

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

I'm almost positive that there was a way to swap in the RX7 differential, not the whole axle, in the old forum. I think it even had photos. Somebody shoud try to find it and save it.

__________________
Prior: 49 Ford/Cady Engine; 56 Chev Convt; Various; 65 GTO Convt; 66 GTO; 67 Camaro; 68 Super Bee; 71 LeMans Sport Convt 455HO; Various; Now: 89 RX7; 89 B2200

__________________

thats awsome, thanks man. that answers every question i had. and so much for a rearend swap ill just do the carrier now. YES!!! now i'll be able to acctualy do donuts when its dry! :thumbsup:

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

oh i found this too http://www.mazdatrix.com/g5.htm
so more rear end specs and years

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

How in the did I miss that? I never even knew that was posted!!

I didn't know any of the diff sets where a bolt in, I thought you had to swap the ring and pinion into your stock housing.

Awesome info, I'll be adding that to the tech section for sure.

Thanks Limequat

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

just some more LSD info off of solomiata's page
http://members.aol.com/solomiata/MiataVLSD.html

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Has anybody looked at the 3rd gen RX7 differentials to see if they will swap? If so a differential from a 93-95 automatic should give you lsd with stock gear ratio.

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

reiderracing.com/pgpowerbrute.htm

Sells a lsd for our trucks about 290$ shipped.

LSD Finally Installed

Here's a link of my lsd install. There is also another one for the rx7 transmission install under TVill25.

__________________
89B 2" spindle drop, bagged wishbone rear, 86 rx7 trans with b2200 bellhousing,fidanza & centerforce DF clutch, electric fan,larger front sway bar, pacesetter,cam, custom intake with Dellorto DRLA 45 carbuerator, Mallory Hyfire VI ignition, Power Brute LSD,tilt. power steering,stainless exhaust.

Yea, I'm working on getting all the info compiled into a tech section page, is why I asked.

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.