Mazda Truck Forum and Tech Site > Truck Forums > B2200 / B2000 > Performance

» Site Links
» REPU
» B2500
» B2600
 > B2600i
Reply
 
LinkBack (55) Thread Tools Display Modes
  #151 (permalink)  
Old 04-02-2008, 12:07 AM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

yah thanks fred, i think i know what i'm looking for but just wasn't 100%

the 3x3 is cut about 1 foot long with the bottom cut out of it and its going to sit on top of this


then the throttle body will sit on the front of it, basically like this in short

or like this


any who heres some pics of trying to mount a custom intercooler i picked up for cheap, i just gotta move its outputs to fit properly














oh and while i was taking everything off i figured i'd try mocking up my new front bumper (and you can see the piece of tubing i'm gonna be using for my new intake plenum in the lower right hand side)



enjoy
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Last edited by dealwithit : 04-02-2008 at 12:09 AM.
Reply With Quote Top
  #152 (permalink)  
Old 04-03-2008, 12:16 AM
Ohm's Avatar
Ohm Ohm is offline
Senior Member
 
Join Date: Apr 2007
Location: Keizer Or
Posts: 1,835
Ohm is on a distinguished road
Garage
Default

Stay tuned until next time when Dealwithit This has got to be one of the longest, most complete build logs I have ever seen. Its fun just to log in and look at what you have done.
__________________
Stock block and head, bored 0.040 over with a shaved deck. Holley 5200, Pacesetter header, 2" exhaust, Accel coil and 8.2mm wires, mechanical rocker arms, Probe crank pulley, electric fan and too much compression for its own good. '85 RX7 GSL LSD, lightened flywheel, Miata transmission and dual exhaust soon
Reply With Quote Top
  #153 (permalink)  
Old 04-03-2008, 12:37 AM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

yah, well i like to take pics and possibly inspire others to do the same sort of swap (plus i'm totally broke so everything is being done as cheap as possible!) you want to see a long thread look at fred's build on mx6.com

so today i remounted the out pipes on my intercooler i'll snap some pics of it tomorrow

thanks for the comment ohm

i always love to check in and see what progress anyone else has made on there builds which is probably why i update almost every day
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #154 (permalink)  
Old 04-03-2008, 07:02 AM
fredio54's Avatar
Senior Member
 
Join Date: Jul 2007
Posts: 1,046
fredio54 is on a distinguished road
Garage
Send a message via AIM to fredio54 Send a message via MSN to fredio54
Default

Quote:
Originally Posted by dealwithit View Post
you want to see a long thread look at fred's build on mx6.com
HEY! mines *only* 9 pages long, this is page 17!! lol

I'll give you that my comments are a separate thread and that I probably have a few more pictures posted up though (I took about 1gig of photos and have about 800 online :-) )
Reply With Quote Top
  #155 (permalink)  
Old 04-03-2008, 07:18 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

and you get like 20 - 30 posts per page on mx6
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #156 (permalink)  
Old 04-05-2008, 10:10 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

well more pics!

i got started on my intake plenum, got the intercooler almost done and mounted, some material for my grill work, my new seats....etc

the new grill material. i'm gonna cut out the back of the grill and put some of this across like an insert so i can have more space behind for the intercooler




like this but the grill will only be 3 chrome strips with no black plastic


newly positioned intercooler pipes (i finally figured out the welding machine by the end)




now the pipes clear perfectly




so far on the plenum
















and my new seats 93 mx6 freebies


oh and i picked these up for free too


__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #157 (permalink)  
Old 04-06-2008, 06:48 PM
Racer X's Avatar
Senior Member
 
Join Date: Apr 2007
Location: Vanderhoof BC, Canada
Posts: 977
Racer X is on a distinguished road
Garage
Send a message via MSN to Racer X
Default

Looks good.
__________________
My Daily Driver

My Truck pics
Reply With Quote Top
  #158 (permalink)  
Old 04-08-2008, 12:10 AM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

well more pics! anyone sick of them yet? lol

ok so i almost have my plenum done, and i've started on my coolant pipe









**** that looks nice on there! and it was so easy to make too!






the pipe i grabbed from work was 1 5/8 which turned out to be too big so ill grab the 1 3/8 tomorrow and make the same thing out of that.


enjoy
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #159 (permalink)  
Old 04-08-2008, 04:43 AM
Kyrasis6's Avatar
Administrator
 
Join Date: Mar 2007
Location: Malfunction Junction, SC
Posts: 6,184
Kyrasis6 is on a distinguished road
Garage
Send a message via AIM to Kyrasis6
Default

lol, should have added some riser tubes and just stuck the plenum out the top of the hood

Then dress it up with one of those big funny car hood scoops!!! hahaha.
__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.
Reply With Quote Top
  #160 (permalink)  
Old 04-08-2008, 07:05 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

trust me if it didn't have the fancy pearl paint on it i would have just done something like that. but this way it won't interfere with my battery either
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #161 (permalink)  
Old 04-11-2008, 12:07 PM
Ohm's Avatar
Ohm Ohm is offline
Senior Member
 
Join Date: Apr 2007
Location: Keizer Or
Posts: 1,835
Ohm is on a distinguished road
Garage
Default

Chrome it!!! No one is getting tired of the pics, the server is probably having a coronary but who cares. Can't wait to see more
__________________
Stock block and head, bored 0.040 over with a shaved deck. Holley 5200, Pacesetter header, 2" exhaust, Accel coil and 8.2mm wires, mechanical rocker arms, Probe crank pulley, electric fan and too much compression for its own good. '85 RX7 GSL LSD, lightened flywheel, Miata transmission and dual exhaust soon
Reply With Quote Top
  #162 (permalink)  
Old 04-12-2008, 10:37 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

so guys i got the ignitors mounted and found an oil leak in my tranny, fixed it and etc......






b2200 tail housing (oil was leaking out the other side of the 2 weird bolt holes)


rx7 tail housing


rx7 box


b2200 box


plenum machined


tranny with tail housing off, in truck




power steering return line (cutting and putting big end on little flange)


enjoy!
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #163 (permalink)  
Old 04-14-2008, 06:54 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

more lines connected. power steering should be ready to go!





the little elbow piece i shortened and turned(last pics from previous post)


enjoy
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #164 (permalink)  
Old 04-16-2008, 11:35 PM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

haha well more pics! she's getting so close now!!! i can feel it!

plenum during the works, studs installed and pipes mounted




intake threads drilled out


all bolts replaced with studs, no more strippage!!!!


intercooler up and hanging


ok now plenum is almost done, just gotta mount the throttle cable mount to it.


the new throttle body, (only a stock 55mm for now, but easy enough to swap up to a 65 later)


nice!!!


coolant pipe bolted on (i'll come back and clean it up later once everything is working)


hood latch after some modification(shortened it so the intercooler can sit up as high as possible)








and the last thing i have to mount on the plenum


enjoy i know i am!
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
  #165 (permalink)  
Old 04-18-2008, 12:12 AM
dealwithit's Avatar
Super Duper Moderator
 
Join Date: Apr 2007
Location: Coquitlam, bc
Posts: 5,244
dealwithit is on a distinguished road
Send a message via MSN to dealwithit
Default

ok so starting on the intercooler pipes now.



2 bends just wasn't tight enough so.......




cuting up some coolant hoses to fit




enjoy
__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Reply With Quote Top
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

LinkBacks (?)
LinkBack to this Thread: http://www.mazdatruckin.com/vBulletin/performance/1225-my-f2t-swap-d-56k-warning.html
Posted By For Type Date
1947 Ford 1.5 Ton 'Heavy' W/ A Cummins - Page 6 - Diesel Bombers This thread Refback 04-19-2010 06:19 PM
71 Chevelle Cummins transplant t56 - Diesel Bombers This thread Refback 04-13-2010 12:45 PM
mx6 motor in a b2000 - Page 2 - Mazda MX6 Forums: MX6 Forum This thread Refback 04-12-2010 03:08 AM
84 6.2 liter diesel to 97 3/4 ton chevy swap - Diesel Bombers This thread Refback 04-03-2010 12:07 AM
Perkins 4.236 in 75 Range Rover - Diesel Bombers This thread Refback 03-24-2010 11:39 AM
View Profile: dealwithit - Cummins 4BT & Diesel Conversions Forums This thread Refback 03-16-2010 07:39 PM
500HP 10 second Diesel Benz - Diesel Bombers This thread Refback 03-13-2010 08:29 PM
my 4bt cop car This thread Refback 03-08-2010 11:20 AM
OM616 turbo pic - Page 3 - PeachParts Mercedes ShopForum This thread Refback 03-08-2010 12:19 AM
'91 Toyota Pickup - Benz OM617 diesel This thread Refback 03-07-2010 11:47 PM
617 in a jeep - Page 2 - PeachParts Mercedes ShopForum This thread Refback 03-02-2010 10:00 PM
Adapter plate This thread Refback 02-22-2010 10:58 PM
OM617 in a Land Rover Disco This thread Refback 02-22-2010 04:56 PM
'91 Toyota Pickup - Benz OM617 diesel This thread Refback 02-21-2010 10:46 PM
83 240D engine swap into mazda b2200 - Page 3 - PeachParts Mercedes ShopForum This thread Refback 02-17-2010 11:38 AM
Detroit Diesel Conversions - Diesel Bombers This thread Refback 02-13-2010 10:50 PM
83 240D engine swap into mazda b2200 - Page 3 - PeachParts Mercedes ShopForum This thread Refback 02-04-2010 01:16 AM
OM616 turbo pic - Page 3 - PeachParts Mercedes ShopForum This thread Refback 01-31-2010 08:44 AM
Pics of Intake manifold for rwd - Page 2 - Mazda MX6 Forums: MX6 Forum This thread Refback 01-28-2010 11:08 AM
67 Ford F100 with Isuzu 4BD1T - Page 27 - Cummins 4BT & Diesel Conversions Forums This thread Refback 01-21-2010 10:54 AM
project This thread Refback 01-19-2010 06:15 PM
Home Made Special Tools, This is where members can share how they made special tools - PeachParts Mercedes ShopForum This thread Refback 01-16-2010 10:17 AM
67 Ford F100 with Isuzu 4BD1T - Page 27 - Cummins 4BT & Diesel Conversions Forums This thread Refback 01-13-2010 03:25 PM
how much and how long? - Diesel Bombers This thread Refback 01-10-2010 02:36 PM
'91 Toyota Pickup - Benz OM617 diesel - Cummins 4BT & Diesel Conversions Forums This thread Refback 01-08-2010 09:29 PM
home made propane kit - Cummins 4BT & Diesel Conversions Forums This thread Refback 01-08-2010 04:11 AM
my 4bt cop car - Cummins 4BT & Diesel Conversions Forums This thread Refback 01-06-2010 09:48 PM
Mercedes 240/300 in S10? - Diesel Bombers This thread Refback 12-24-2009 08:52 PM
two many irons not enuf fires - Diesel Bombers This thread Refback 12-24-2009 02:04 PM
1969 Ford Crew Cab..... - Diesel Bombers This thread Refback 12-23-2009 11:34 AM
best MB diesel for a swap - PeachParts Mercedes ShopForum This thread Refback 12-22-2009 11:29 PM
12valve Suburban vs. my 94 - Diesel Bombers This thread Refback 12-20-2009 11:43 PM
new owner of a 240D - Page 3 - PeachParts Mercedes ShopForum This thread Refback 12-18-2009 01:13 AM
My Cummins swap. Lots of pictures - Diesel Bombers This thread Refback 12-16-2009 09:16 PM
Nissan Hardbody 3.9 swap - Diesel Bombers This thread Refback 12-14-2009 04:28 PM
Lets see your Stacks - Page 8 - Diesel Bombers This thread Refback 12-06-2009 05:25 PM
Kubota Ranger Swap - Page 3 - Diesel Bombers This thread Refback 12-04-2009 09:23 PM
cummins before strokin ??? - Page 2 - Diesel Bombers This thread Refback 12-03-2009 07:36 PM
Here is my conversion - Diesel Bombers This thread Refback 12-02-2009 06:47 PM
This would be cool OM6XX to 700R4 - PeachParts Mercedes ShopForum This thread Refback 11-30-2009 09:42 PM
Modification Compulsion Club - Page 4 - PeachParts Mercedes ShopForum This thread Refback 11-25-2009 02:11 PM
What is making that sound (some sort of engine knock) - PeachParts Mercedes ShopForum This thread Refback 11-24-2009 11:40 PM
f2t in kia sportage!!!!! - Mazda MX6 Forums: MX6 Forum This thread Pingback 11-16-2009 01:07 PM
Proper antilag, thoughts, comments, suggestions? - Page 8 - Mazda MX6 Forums: MX6 Forum This thread Refback 10-26-2009 03:59 AM
Mazda Aftermarket Performance Part List This thread Refback 10-25-2009 09:02 AM
Mazda Aftermarket Performance Part List This thread Refback 10-25-2009 02:40 AM
83 240D engine swap into mazda b2200 - Page 3 - PeachParts Mercedes ShopForum This thread Refback 10-09-2009 06:43 PM
1989 B2200 Se5 - Mazda MX6 Forums: MX6 Forum This thread Refback 10-06-2009 05:07 PM
B2200 upgrade to 12v head - Page 2 - Mazda MX6 Forums: MX6 Forum This thread Refback 09-12-2009 03:55 PM
Pics of Intake manifold for rwd - Mazda MX6 Forums: MX6 Forum This thread Refback 09-10-2009 04:16 PM
FS: B2200 - Built Engine, Custom Turbo, Full Swap -- HUGE Price Drop, NOW with Pics!! - Mazda MX6 Forums: MX6 Forum This thread Refback 09-08-2009 06:56 PM
More Power ou of B2000 - Mazda Forum - Mazda Enthusiast Forums This thread Refback 09-07-2009 11:49 PM
Trucks Forum - Mazda Trucks | Mazda 2.2 MX-6 motor - Page 1 This thread Refback 09-07-2009 10:21 PM
83 240D engine swap into mazda b2200 - Page 2 - PeachParts Mercedes ShopForum This thread Refback 09-04-2009 12:38 AM
FIAT X-19 with 3 cylinder caterpillar diesel - Page 2 - PeachParts Mercedes ShopForum This thread Refback 09-03-2009 12:34 PM

Similar Threads
Thread Thread Starter Forum Replies Last Post
mazda engine swap choices (56k warning) dealwithit Performance 18 07-30-2009 08:30 PM
my F2T swap :D (56k warning) dealwithit Archives 398 06-10-2009 12:58 AM

» In Memorandum
RoadRacer
1/1971 - 5/2010

We are accepting donations for RoadRacer's family, please use the button below if you would like to help.

Powered by vBadvanced CMPS v3.2.1

All times are GMT -5. The time now is 06:03 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Ad Management plugin by RedTyger
Design by vBSkinworks