Body lift finaly done!

futrao · #16 (**permalink**) 10-17-2009, 10:25 PM

here is the only pic i got b4 i finished thats just when i got all the pots in place and the body bolted down

i'll take some more toomorrow and with a real cam too lol

bulrid8 · #17 (**permalink**) 10-17-2009, 10:31 PM

Looks good.

futrao · #18 (**permalink**) 10-17-2009, 10:34 PM

thankx it was a pita to get those 2 bolts in the back of the cab i had to tare down half of the interior

no kool

bulrid8 · #19 (**permalink**) 10-17-2009, 10:37 PM

I know that. Mine was the radiator. I could not use the drop brakets, because the bumper was in the way. I just bought a longer uper hose and mounted it in stock location.

futrao · #20 (**permalink**) 10-17-2009, 10:49 PM

i was gonna do that and the clutch fan was hitting the lower rad hose so i had to vent the lower rad mount to get the bumper on the do the rad drop with the upper rad mounts not to save but it is in there pretty tight it doesnt have play either so i'm sure i'll be fine, i had to loose some brackets like the ebrake bracket that goes in the frame and the clutch slave cylinder that goes in the firewall cause the lines where pretty stretch out and one of the brake line was a lil stretch and i vent the brake that hold it and it was fine after that

bulrid8 · #21 (**permalink**) 10-18-2009, 08:40 AM

Yes, luckily I have an electric fan. I had to loosen the clutch line for room. I put all new longer brake lines on it.