Rear C Notch Diagrams

does anyone here have a copy of a diagram that they used when making their c notch? im going to do this, but thought that i could get the info with out having to figure it all out on my own.

i ended up finding the dimensions at suicidedoors.com

Good Luck....keep us updated

__________________
1992 B2200 rolling on 18" Titans, Old school static drop, Holley 5210 w/K&N air filter, MSD 6AL Box and Blaster coil, Yota front end, 2.5" exhaust, header,Ranger headlights swap & electric fan mod Proud member of the 200k club
Check my Ride at CarDomain Here

If you posted your plans I would be happy to add them to the tech section for others to use.

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

I will try to do a write up as i go with pics. me and a buddy of mine will end up doing it. probably not for 2-3 weeks. birthdays and such. the shop that does all of my work stuff, such as laser cuts and fabbing, is going to make my notches for me. i took the measurements from suicides website, drew them out, and took themn over to him. best part is, because we (work) do so much business with him, he said he would do them for free. he started out at $8 then $6 then he said well just sneak then by.
so, when i get going, watch out!

thats sweet man, i will be notching the back this winter while i'm dropping in my rotary. what gauge steel/thickness of steel will you be using and how high will the top of the notch be?

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

Maybe after your fab ends you and your buddies could fabricate and sell to us the notchs?

__________________
1992 B2200 rolling on 18" Titans, Old school static drop, Holley 5210 w/K&N air filter, MSD 6AL Box and Blaster coil, Yota front end, 2.5" exhaust, header,Ranger headlights swap & electric fan mod Proud member of the 200k club
Check my Ride at CarDomain Here

what a great idea!

__________________
93 b2200 F2t swap build thread sold
92 B2600i with a 82 3.0L 5cyl 617 benz Turbo Diesel build thread
91 b2200 fully airbagged, 4 linked, 1/2" lines, lays frame rebuild thread sold
91 b2200 v8, toy axels, 39" tires thread sold
91 EF Si, B18a1 swap, etc... build thread

'̿ ̿ ̿'̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

ha ha thats funny cause i was kinda thinking the same thing! make it for cheap, sell for BIG money. na, i couldnt do that. not that type of person.
as far as the steel, it will be laser cut out of 3/16 plate steel. its getting cut along with some parts that we use at work.

this is the diagram i ended up drawing off he measurements i got.