Stalled while driving 1995 b3000 3.0 manual

I was driving my usually dependable B3000 when it suddenly stalled and will not start . It turns over just fine. I have tried several things.I have No Spark !

1 Check Fuses and relays
2 Spray starting fuel in intake
3 Change ignition coil
4 Change crankshaft sensor

What is left on this thing it is driving me nuts? The ignition module seems like the last thing to do ?

When you say you have no spark, you are saying you have physically confirmed that you are not getting spark or are you just referring to the fact that the engine won't fire up?

__________________
Most Recent Updates:
Posting Guidelines and Rules

Warning: The contents of this post do not constitute a generalized opinion for or against the topic it is posted within.

I pulled out plug and had wifey crank it over and had no spark.

I don't fully remember how the fuel shut-off Ford installed on these works, but it is possible that it cuts power to both the fuel pump and the ignition. It should be in the passenger side kick panel. Hit the button and see if that fixes it.

__________________
Past Projects:
1980 Caprice Classic "Goliath the Pimpmobile"
1989 Mazda B2200 LX Extended Cab "Rarity" Archive Pics

Current Projects:
1986 Mazda B2000 **Turbo Diesel** "Project Redemption" Build Thread
1995 Honda Civic "Maggie" Getting a MS1/MS2 conversion after diesel completedFun Videos**My Civic Pics (link fixed)

I meant to get back on here sooner. I fixed the truck and it ended up being the 30 AMP fuse and thats it . I double checked everything and thats what it was.Dont know how I missed it the first time DUH when I was looking at the fuses for an easy fix in the first place.